Thursday, December 31, 2009

fruit basket

I am having visions of a soft fruit basket of cotton yarn. It would have a square bottom and an octagon top. Well, maybe more of an octagon middle since by the top it might be quite circular unless given a bit of wire or something to keep the corners.

The plan, I think, starts with choosing a finished circumference in stitches that is an odd number time eight. The knitting would start with the same squares as before for the bottom. When the number of stitches is half the planned complete number, stop increasing on half of the increases while the others start increasing to the other side. I've been thinking that the increases should center around opposing sides, but perhaps on the same side of each edge would be better. And the more I ponder which is better the more I think it won't really hit an octagon shape at all. The first will go more to a boat shape and the second will continue to be square but will twist a bit as it goes. It really doesn't even need to have the increases change sides.

For a more rounded project, one could start a little earlier in the shaping and just decrease the frequency of increases along the lines that will be stopped. Patterning could be used to emphasis or even generate the octagonal shape, if that is desired...

It's a work in progress, of course, until something has been knit. And then there's always the second one.

Saturday, October 24, 2009

Octopus toy

I thought of someone to give it to, so I can make a big octopus. Here it is finished and swimming along on the couch.


I started with the legs. The octopus legs are based on the coiled tube seen here. They need to be stuffed every inch or two while knitting. Starting at the tip of the tentacle:
Bind on 3 stitches. This is knit in the round.
Row 1: k1, yo, k2.
Row 2: k1, yo, kt (knit with stitch twisted), k to end.
Repeat row 2 until there are 12 stitches including the yo.
Row 10: k1, yo, kt, k3, k2tog, k5.
Repeat row 10 until the leg is long enough then cut the yarn and pass it through the stitches to hold them for later.

Twisting the other direction:
Bind on 3 stitches.
Row 1: k2, yo, k1.
Row 2: k until the yo, kt, yo, k1.
Repeat row 2 until there are 12 stitches.
Row 10: k5, k2tog, k3, kt, yo, k1.
Repeat row 10 until long enough then hold the stitches.


The twist wasn't the same size for each of these even though one is the reverse of the other. To complete 8 legs, I knit 2 each in each direction then arranged them how I liked with the smaller twists to the front and back and the bigger twists to the side. Join the legs together simply looping the yarn twice through each of 3 stitches on each leg.


Each leg has some stitches that look straight and some that seem to be on a diagonal. The legs are arranged so that the straight stitches are centered to the outside of the circle (which will become the top of the octopus) and the diagonal stitches are to the inside (which will be the bottom.)

Once connected into a circle, place the 2 unused stitches of the bottom plus one used stitch on either side on each leg onto knitting needles for 32 stitches. Starting between the back legs:
Row 1: k to end
Row 2: k3, (k2tog, k6) x3, k2tog, k2.
Row 3: with last stitch of row 2 (k2tog, k5) x4.
Row 4: k3, (k2tog, k4) x3, k2tog, k1.
Row 5: (k2tog, k3) x4.
Row 6: k2, (k2tog, k2) x3, k2tog
Row 7: (k2tog, k1) x3, k2tog.
Bind off the last 4 stitches by passing the yarn through each once front to back and once back to front and tying tightly. Knots on the inside will not show.

Place the unused stitches of the top on needles together with one on each side of the used stitches for 48 stitches. Starting between the back legs:
Row 1: k to end.
Row 2: (k6, pm (place marker), yo, k6, pm) x4.
Row 3: (yo after marker, k to 2nd marker) x4.
Row 4: k to 1st marker, (yo before marker, k to 2nd marker) x3, yo, k to 1st marker.
Row 5: (yo before marker, k to 2nd marker) x4.
Row 6: k to 1st marker, (yo after marker, k to 2nd marker) x3, yo, k to 1st marker.
Row 7-9: repeat row 4-6.
Row 10 and for a few rows: k80.

Decreases aren't done symmetrically. Instead, the middle is decreased for a few rows, then decreases are added to either side for a few rows. This continues until there are eight decreases. The decreases alternate between k2tog and ssk so that the decrease does not create a spiral. Here is an illustration showing the decreases. The arrow marks the middle (front) and the bar marks the back where rows start. On the 1st 3 decrease rows, the red decreases are made, on the 2nd 3, the blue, then green, purple, cyan.


Row 1 (red): k39, k2tog, k39.
Row 2 and all even rows: k.
Row 3: k39, ssk, k38.
Row 5: k38, k2tog, k38.
Row 7 (blue): k25, ssk, k11, ssk, k11, ssk, k24.
Row 9: k24, k2tog, k10, k2tog, k10, k2tog, k24.
Row 11: k24, ssk, k9, ssk, k9, ssk, k23.
Row 13 (green): k13, k2tog, (k8, k2tog) x4, k13.
Row 15: k13, ssk, (k7, ssk) x4, k12.
Row 17: k12, k2tog, (k6, k2tog) x4, k12.
(Might be time to think about getting the head stuffed.)
Row 19 (purple): k5, ssk, (k5, ssk) x6, k4.
Row 21: k4, k2tog, (k4, k2tog) x6, k4.
Row 23: k4, ssk, (k3, ssk) x6, k2.
Row 25 (cyan): k2tog (includes last stitch from previous round), (k2, k2tog) x8, k2.
Row 27: ssk, (k1, ssk) x8, k1.
Row 29: k2tog x8.
Finish by drawing the yarn through the loops once each direction and pulling tight. Knot and finish.

The yarn and needles don't matter. The above octopus uses about half a skein worth (total) of Caron Simply Soft in persimmon and sage on a set of #3 dpn, which are much smaller than recommended for this yarn. The legs each have a different design of these two colors. Once solid of each, and one each split in half alternating in opposite ways. One is a swirl (alternating every row), one alternates every 4 rows, one alternates every 16 rows. The last starts with 3 rows sage, then 4 rows persimmon, then 5 sage and so on increasing in number each time.

Saturday, July 25, 2009

little purse -- gunslinger style

I don't like to be pocketless and I don't like the idea of carrying a purse, necessitating putting the stuff that should be in pockets down somewhere and possibly leaving it all wherever it was put. I need something at least large enough for a pair of keys.


This is my solution. A sort of pocket that can be worn just as a holster would be.

Yarn: Lily Sugar'n Cream. About 1 skein of earth ombre (naturals) colorway or pick your own color(s).
Needles: #6 (4mm) 29" circular needle.
#3 (3.25mm) double pointed needles.
Tapestry needle.

Gauge: 20 stitches per 4", but not particularly important.

Mine came out to 4" wide and 4.75" tall with 34" belt section, plus ties, and is in desperate need for a bit of blocking.

Cast on 22 stitches on the larger needles. Knit 5 rows, ~0.75". Cast off 4 stitches in the middle on the next row, then chain 4 stitches on at the middle for the next row for a button hole. Continue knitting back and forth until the work is 2.5" long for the flap. Chain on 24 stitches after going your preferred direction and join in the round to start the main body of the bag. Continue knitting in the round for 4.75". During the last row finishing along the front, slip the first of the front stitches over the last back stitch. Slip the last front stitch over the first back stitch at the very end. Cut the yarn leaving enough to graft the bottom together. I liked the purl side better and turned it to have that on the outside.

Decide on a left or right side pocket then pick up 3 stitches on the inside of the bag on that side such that one stitch is in the first line of stitches that becomes the flap and two are not. Knit these as an I-cord on the smaller needles for 4.5". Cut the yarn but don't bind off.

Cast on 3 stitches and knit another piece of I-cord for 11.5". If a left bag, continue knitting across the three stitches of the end of the first I-cord. If a right bag, knit back picking up the end of the first I-cord. Continue knitting back and forth over the 6 stitches for 2.75" then put the left three stitches on a holder and continue in I-cord to make a tie, ~8". Bind off the end by passing the yarn through each stitch back to front, then front to back. Pick up the other 3 stitches again for a second I-cord of the same length with the same bind off.

Pick up 3 stitches on the other side and knit them in I-cord for 4.5" again. Undo the cast on end of the second I-cord to reveal 3 live stitches and connect them to the first as per the instructions for the other side. Knit back and forth on the 6 stitches for 20" then add two I-cord ties as on the other side.

Start a crochet chain just inside the corner of the pocket and chain it for 2". Cut the yarn leaving a long tail. Do the same to the other side. Pull the yarn ends into the top I-cord with a needle such that they go in with a width between that is smaller than the pocket width and come out at the same hole between stitches. Tie the ends together tightly, then pass the ends back into the I-cord.

Finally, add a button to the center at the level of the button hole. Mine is a yarn button. It is tied using the flat button knot found here, tied from a crochet chain. The end that sticks out the front was tucked under and in and then the two ends knotted together. The crochet is only long enough that the button is made up of the chain but this knot of the ends is only the yarn. The ends were then passed through the knitting and tied again. Many other yarn buttons exist, or any handy button may be used.

Variation: If to be used with pants, the gunslinger style can be completed by adding some long crocheted ties to each corner of the bottom that can be tied around the leg for further stabilization.

Saturday, July 18, 2009

knit purse: fail

The plan for a bag relies on the rectangle in a round knit piece. It was simply to use the rectangles to make a bag about 20 stitches high, 30 wide, and 9 deep. The brown sides are started from the middle so that they'll come to 9x20 stitches. The variegated Starts purling down one of those brown edges, along the bottom, then up the other side. Stitches are chained on for the flap to go over the top and down about 14 stitches, then the other brown piece was purled on three sides, and finally stitches for the front were chained on. Once the border of that larger rectangle was established, the middle was filled in until finally the stitches were grafted together (like sock toes). The safety pins are holding the live stitches where a handle can be attached.



Knitted on #6 needles with sugar'n cream. It was chosen to be 9 stitches deep so that 3 I-cords could be knitted from them and braided together for the handle, with a piece of flat knitting over the shoulder for comfort, perhaps. This makes it deeper (2" at the bottom, 2.5" at the middle) than really desired. It came out 3.5" high and 6" wide at the edge but 8.5" wide at the bottom. This is a fair bit wider than was hoped for.

The handle was probably going to make it pull open at the sides annoyingly anyway. It'll be pulled apart to make another one with a different and hopefully better design.


Maybe I'll try a "gunslinger" style, like the scribble to the left. Perfect for cell phones, of course. It'll be a greater challenge to get it so it doesn't pull open at the sides a bit.